Mini Truckin'
Click here to find out more!

Project DRAG ***

  
Mini Truckin'
1 |  2 |  Next   | Last 
Item Posts    Sort Order

Project DRAG ***

 
sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 07/12/12
10:24 PM

Picked this 90' toyota up for $200,didn't run or shift,no compressors for the airride.truck sat for about 5-6years.hauled it to my buddies house and we started eliminating causes of why it didn't run.clean the injectors,put a clean fuel cell in,bleed slave cylinder and a tune up. and we was on the road.truck was "bagged" up front only with no compressor's but luckly the tank had a schrader valve so i could air up with my air compressor at home.ordered 2 viair 444's and started buying parts for the rear of the truck,its still a big project truck but i still drive it daily till i fix my other vehicle.

0326121633 01
Photo 0393
Photo 0395
0528121720 01
traded my 15s for 20s
0623121604 01
not perfect but close
0711121958
layin body... i wish
0711122026[/QUOTE]
gettin closer to having the notches compeleted
0712121508A 01  

5569 5569
Administrator | Posts: 7613 | Joined: 08/06
Posted: 08/02/12
11:13 AM

this is great! how's it comin' along?
200 bucks, not bad... ;-)  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 08/09/12
11:38 PM

coming along good should have update in a few weeks got things i gotta do before working on it again.plan on doing a bed swap soon will have tons of pics when i get it  

5569 5569
Administrator | Posts: 7613 | Joined: 08/06
Posted: 08/10/12
11:09 AM

but...but...what about the taillights!?   Wink  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 08/10/12
11:00 PM

gonna be cuttin out the buckets and using them on the other bed already has slots in roll pan for leds. plan on using some older model caddy's 59 to be exact  

5569 5569
Administrator | Posts: 7613 | Joined: 08/06
Posted: 08/13/12
10:52 AM

'aight that's good. I like it.  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 08/17/12
10:05 AM

100 2221

1cu.ft. 6.5 70watts tuned @45hz.  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/01/12
09:26 AM

spun main or rod bearings so its time for a 357sbc/T350 trans  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/04/12
07:32 PM

who's ready for update photos? took me 4 days to clean my shop and it isnt perfect but alot better


IMG 20120904 192509

556600 10152073782440015 1797588712 N

more to come tomorrow!  

5569 5569
Administrator | Posts: 7613 | Joined: 08/06
Posted: 09/05/12
10:59 AM

more update photos!  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/05/12
12:05 PM

should have photos of the frame cleaned up tonight  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/05/12
06:00 PM

will this be the post where the motor is out?..........


IMG 20120905 192739

bottom(right side) is bent.
IMG 20120905 192801

423728 10152076164730015 682499677 N

been a long day gonna call it a night and work on the frame tomorrow  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/06/12
09:06 PM

teaser
582680 10152078772070015 318401812 N  

5569 5569
Administrator | Posts: 7613 | Joined: 08/06
Posted: 09/07/12
02:47 PM

are we in for a productive weekend yeah yeah?  

sparkinyota sparkinyota
New User | Posts: 19 | Joined: 07/12
Posted: 09/08/12
07:34 PM

got the motor apart with the help of a friend  found out its a 355 with TRW chromoly hardend push rods TRW forged pistons with a 280 cam. gonna port the heads and  hone it cant wait to get this thing back together.going to have dual 3in exhaust. not sure what mufflers ima go with yet but its gonna be pretty awesome when its done.got some drag blocks to put on a friends truck tomorrow then ill be going to get my trans and start mock up.possibly make some mounts tomorrow too.  

1 |  2 |  Next   | Last