|
|
Item Posts
Sort Order
|
|
|
I want to bag my 79 Toyota Pickup
|
|
Posted: 08/01/09
12:40 AM
|
|
I have a 1979 Toyota Pickup and I would like to get some detailed information on how bag it. I have always owned lifted full size trucks and now I wanna try out the mini trucks for a change. If you could help it would be greatly appreciated.
1979 Toyota 3/4 Ton 2wd [KRUEL INTENTIONZ]
Check out Kruel Intentionz on MySpace and the Forum:
http://www.myspace.com/kruel_intentionz
http://kruelintentionz.freeforums.org
|
|
|
|
|
Posted: 08/01/09
05:33 AM
|
|
sell it to me
|
|
|
|
burnzya
Moderator
| Posts: 940
| Joined: 10/07
Posted: 08/01/09
09:21 AM
|
|
the frame and suspension on the toyotas are the same from 79-95 so any tech article for a toyota will work. the only exclusion really is the lower control arms and spindles on the 79-95. a lot of people swap upper and lower control arms, and spindles/hubs from a 84-95 model, which is a bolt on affair. it also allows you to run a drop spindle for the later models since nobody makes one for the 79-83.
a couple things you'll need are:
a torsion truck bracket kit (or make them yourself)
a link setup (3,4,5,6 your choice)
to lay it will need a 1 1/4" to 1 1/2" frame "z"
tranny crossmember need s to be modified or a new raised one since they hang too low.
also will need to trim the wheels tubs up front.
that should be a pretty good start!
|
|
|
|
|
|
|
Posted: 08/04/09
12:47 PM
|
|
Thanks man, that helps me out a lot.
1979 Toyota 3/4 Ton 2wd [KRUEL INTENTIONZ]
Check out Kruel Intentionz on MySpace and the Forum:
http://www.myspace.com/kruel_intentionz
http://kruelintentionz.freeforums.org
|
|
|
|
|
|
|