Well this is going to be for my 94 s-10. To start off this truck is going to be 85% custom frame. Meaning that the only part left of the stock frame is the control arm mounts and the engine cross-member. I’m going to be using an 87 corvette rear-end and throwing a SBC in too.what i'm shotting for:: <strong>Well let get to some picture</strong> <strong>start of the new ralls:</strong> <strong>stock to new rails transition:</strong>
little more for todaygussets that i added to all the joints:hated the way that front of the frame looked so that had to go:old:new:started the body mounts:core supports: cab mounts:start of crossmember:well that it for now. back to work
lookin sweet
well start t0 mounting the corvette center section:mounts for the lower armsmounts for the upper arms:start to done a little tubing work
wow, keep the updates coming! Quite an extensive project, can't wait to see how it turns out.
more tubing work:started working on the corvette knuckles:
nice!!!
keep puttin in the hours! thing's crazy..
here is a little more:brackets i made for the top of the corvette knuckles:upper arms builtstart on the lowers:both arms in place:
looks great, can't wait to see some more pics.
well here is a little update start building the bag mounts: run out of tubing so that is all i got done on that.moved on to the lever arm system:upper bag mount:lever arm mounted still have more work to do on this part:system all together: thats it for now
holy *** that is going to be one of the gnarliest baggers i have ever seen
thanks for the updates! looks like you've certainly been busy. keep the pictures comin'!
started the battery and compressor mountsran into a problem putting the core-support on. i have to clearance the frame a little:
well here are a couple picture of the truck layed out on the ground at a local show:back to work on it now. got the frame all disassembled and start the fun process of finishing all the little things