|
Num Posts
Sort Order
|
Kaotik
New User
| Posts: 4
| Joined: 07/08
Posted: 07/20/08 09:33 AM
|
|
wanting to know what kind of engine if anything people are putting in the toyota pickups. looking to do this myself on mine, it has a 4 inch body drop so the may hinder the swap but not for sure any info would be greatly appreciated
|
Kaotik
New User
| Posts: 4
| Joined: 07/08
Posted: 08/02/08 09:59 PM
|
|
guess no has done this or just dont want to tell?
|
TagDragger
Enthusiast
| Posts: 559
| Joined: 01/07
Posted: 08/03/08 01:14 AM
|
|
I have seen small block chevys swapped in .
Of course i drag my tag . http://www.myspace.com/firerat6069 http://www.myyearbook.com/tagdragger4life
|
|
|
bueche399
New User
| Posts: 2
| Joined: 08/08
Posted: 08/03/08 06:16 PM
|
|
well man depending onyour personal lvl of mech knowledge you could go several waysprobaboly the cheapest would be to go with a chevy swap v8 or the 4.3l v6 both you can find an ungodly amount of parts that wold make this the cheapest choices to go with. yet if you are not so sure about the interfacing then use a 4 cyclinder motor out of a newer tacoma these are basicaly the same as the 4 banger that came in there you will just have to get the computer and all parts at the same time,which most parts yards would make you a good deal on the bundle. as fars as gettting the mounts for the newer toy motor that would drop it down below the body drop hood hight that may difficult to find but personally i use downey for the parts on my yota there addres should be in any mt mag. hope this helps.
|
|
Posted: 08/05/08 09:39 AM
|
|
Buick v-6 swaps were very popular. they used to sell kits for that swap. check some of the 4x4 sites or yotascene.com
|
|
Posted: 08/05/08 09:41 AM
|
|
oh and there was a guy from nz or austraillia that had an orange toy with a twin turbo supra motor. you can see it on domination the video world tour and I think it was featured in MT also.
|
|
Posted: 08/06/08 03:37 AM
|
|
http://www.northwestoffroad.com/parts/engineadapters.html
http://www.off-road.com/trucks4x4/article/articleDetail.jsp?id=274607
|
Kaotik
New User
| Posts: 4
| Joined: 07/08
Posted: 09/02/08 07:08 PM
|
|
thanks for the info guys, i stopped checking this cause of the lack of response. just got 2 lil plates left an the cab of the body drop is done, still looking at engines. thanks for those websites layedoutnissan there a big help. i've been off work hurt so progress has been slowed down. def wanting to go with the small block chevy, maybe a ford if it comes down to size. i've pretty much already decided i'ma have to cut out my hood to fit anything underthere
|
|
Posted: 09/26/08 08:41 PM
|
|
no problem. I wanted to do the buick v6 in my 83 but never got around to it. post up pics whenever you do it.
|